A Complete Guide About Frequent Garage Door Problems

Garage doors have a very tough job to do. They bear extreme weather conditions, including continuous sunlight, heavy rains, and storms. Due to these factors, they may experience various problems with their structure and equipment. Here are a few of these problems, their causes, and solutions.

Torsion Springs Are Broken

Torsion springs are installed in the upper assembly and are responsible for providing additional force for the movement of the garage door. When a door closes, it puts pressure on these springs causing them to store tension. While the garage door is opening, the tension force from torsion springs coupled with the force of the motor lifts the weight of the door. 

Causes: Each spring spends its time doing a rough job in the assembly. Due to the strain of their job, they may break after some time. They are rated to work for finite cycles. Rust can also be the cause of breakage of torsion springs as it can cause structural weaknesses.

How to fix it: First thing you should do is not operate your garage door with broken torsion springs as it can cause more damage to the assembly. Call for the help of professional and cheap garage door repair in Dallas Tx.

Photo-Eye Not Working Properly

Photo-eye is a type of sensor installed to ensure your safety and the safety of your car while moving through the garage door. This sensor keeps the door open as long as someone is standing in the middle of the door. There is two part of this sensor, one of them shoots a laser at the part of the sensor installed on the other side. If this laser is blocked for any reason, the sensor sends the signal to the motor preventing it from shutting the door.

Causes: A fine layer of dust or disconnected power cable can disrupt the laser of the photo eye. The most common causes include a stain of grease, paint, or oil present on the sensor’s surface.

How to fix it: a simple fix to this problem is wiping photo eyes with a piece of fabric or tissue paper. If the problem still exists, look for the disconnected power cord and fix it from the top Garage Opener Repair in Riverside.

Remote Control Not Working Properly

Remote enables you to control the movement of your garage door without accessing its control panel. If your garage door doesn’t operate with the remote, that means there can be some problem with your remote control.

Causes: The reason behind the inability to control the garage door with the remote include a broken antenna or blocked signal to the motor, the battery of your remote has died, and failure of the remote’s programming.

How to fix it: If your garage door opens and closes from the wall switch, replacing your remote batteries can make it work perfectly. Call for cheap garage door repair in Riverside for repairing the antenna on the motor.

Rollers Are Not On Track

Metal rollers are attached to your garage door that runs on a track to keep your door stable during its movement. These metallic rollers often go off track. Due to the heavy weight and friction between the base of the door and the track, your garage door failed to open as it is stuck. 

Causes: When your garage door is hit by a storm or some vehicle, your garage door is likely to go off track.  

How to fix it: First thing you should not do is try to fix it yourself. The garage door is heavy and could not be lifted with bare hands. Call for top garage opener repair in Riverside because they have specialized equipment and professionals to fix them.

Final Words

If you are dealing with problems with your garage door or associated electrical equipment, give North Star Garage a call and invite the experts in your garage to fix that problem.